Basler A600f Manuel d'utilisateur télécharger pdf (Page 93)

Configuring the Camera

BASLER A600

f 4-27

DRAFT

Field Bit Description

Trigger 12 Indicates a trigger mode control error on the camera.

0 = no error present

1 = A setting in the trigger mode control register (see page 4-25) is

outside of the allowed range

This field is read only.

Trigger Delay

13 Not used on A600f cameras. This bit should be ignored.

White Shading 14 Not used on A600f cameras. This bit should be ignored.

Frame Rate 15 Not used on A600f cameras. This bit should be ignored.

--- 16 ... 31 Reserved

Offset from Base Address: 0x644

Field Bit Description

Zoom 0 Not used on A600f cameras. This bit should be ignored.

Pan 1 Not used on A600f cameras. This bit should be ignored.

Tilt 2 Not used on A600f cameras. This bit should be ignored.

Optical Filter 3 Not used on A600f cameras. This bit should be ignored.

--- 4 ... 15 Reserved

Capture Size 16 Not used on A600f cameras. This bit should be ignored.

Capture Quality 17 Not used on A600f cameras. This bit should be ignored.

--- 18 ... 31 Reserved

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 179 180

Pas de commentaire

Basler A600f Manuel d'utilisateur Page 93